
Mass Standards and Standard Weights of Classes E0, E1 and E2
Mass standards Verwendung:
As national standards – with values derived from the international primary kilogram;
As primary standards – to ensure traceability between national mass standards and weights of class E1;
As mass standards – to ensure traceability between primary standards and standard weights of class E2;
For weighing or comparison measurements on scales of class I or on mass comparators, As an adjustment, testing or calibration instrument for scales with over 1,000,000 steps for quality assurance in accordance with DIN EN ISO 9001ff. For the calibration and official calibration of weights of class E2 in accordance with OIML R111 and E08.
Standard Weights
For the calibration of mass standards of class F1 in accordance with E08 and OIML R111
continue to mass standards and standard weights classes E0, E1 and E2
|
 |

High Precision Weights of Classes F1 and F2
High precision weights - mass standards for the calibration of mass standards of the lower classes in accordance with E08 and OIML R111.
An adjustment, testing or calibration instrument for scales of class II for quality assurance in accordance with DIN EN ISO 9001ff.
Load cells for the depiction of exact pull, pressure or torsion requirements.
continue to high precision weights of classes F1 and F2
|
 |

Precision and Commercial weights of Classes M1, M2 and M3
Precision and Commercial weights - weights for the calibration and official calibration of weights of the lower classes in accordance with E08 and OIML R111.
Adjustment, test and calibration instrument for commercial scales (class III) and industrial scales (class III) for quality assurance in accordance with DIN EN ISO 9001ff.
Load cells for the depiction of pull, pressure or torsion requirements
Learning materials and training (M3).
Load tests in elevator, crane and vehicle construction (M3).
|